Full-Service Roofing | Stratford, WI
Stratford Roofing & Maintenance handles every roofing job from a single-shingle repair to a full commercial re-roof. Here's what we do in Stratford.
Roof Replacement
We replace roofs. It's what we do more than anything else. Our Stratford crews average 15-20 complete tear-off and replacements per month. That kind of volume means we've seen every situation: steep pitches, multiple layers, rotted decking, improper ventilation from the last guy. We fix all of it and install a roof system that's warranted for decades.
Get a Free Quote →Roof Repair
We repair asphalt shingle, metal, flat membrane, and tile roofs. Our trucks carry common repair materials so most fixes happen same-visit. Shingle repairs, flashing replacement, pipe boot swaps, ridge cap fixes, valley re-flashing. All routine for our Stratford crews.
Get a Free Quote →Storm Damage Repair
Not all storm damage qualifies for a full replacement. Hail might only damage one slope. Wind might only lift shingles on the windward side. We document exactly what's damaged and let the insurance company make the call. Honest documentation gets claims approved. Inflated claims get denied.
Get a Free Quote →New Roof Installation
For Stratford new builds, we recommend Tamko Heritage or Malarkey Vista AR for budget-conscious projects and Atlas Pinnacle Pristine with Scotchgard for algae-resistant performance. High-end builds get GAF Timberline HDZ or Owens Corning Duration STORM. Each carries different warranty tiers. We walk you through the comparison so you're choosing with real information, not marketing brochures.
Get a Free Quote →Metal Roofing
Metal roofing works on pitches as low as 3:12 for standing seam and as low as 1:12 with specific underlayment and sealant requirements. Steep pitches look incredible in metal. We help you choose the right panel profile, material, and color for your Stratford home.
Get a Free Quote →Shingle Roofing
Asphalt shingles cover more homes in America than every other roofing material combined. There's a reason. They're affordable, they look good, they last 25-50 years depending on the grade, and they come in dozens of colors and profiles. Our Stratford crews have installed thousands of shingle roofs and we know the product better than most roofers in the state.
Get a Free Quote →Flat Roofing
TPO single-ply membrane in 60-mil or 80-mil thickness, fully adhered or mechanically attached over minimum R-25 polyiso insulation. Hot-air welded seams tested with a probe at every joint. We install per NRCA and manufacturer specifications with tapered ISO insulation creating minimum 1/4" per foot positive drainage. Ponding water is the number one cause of flat roof failure in Stratford. Tapered insulation eliminates it. FM 4473 rated systems available for hail-prone areas. Fully warranted by Carlisle, Firestone, or GAF.
Get a Free Quote →Commercial Roofing
TPO is our most-installed commercial membrane in Stratford. 60-mil thickness, hot-air welded seams, mechanically attached or fully adhered over polyiso insulation. The weld is stronger than the membrane. 15-20 year manufacturer warranties depending on system build-up.
Get a Free Quote →Gutter Installation
We custom-form seamless aluminum gutters on-site from a continuous coil of .027 gauge stock. No factory seams means no seam failures. We form them to the exact length your fascia requires. One piece, one gutter, no leaks.
Get a Free Quote →Roof Inspection
Our inspection covers the roof and the attic. From the attic, we check for daylight through the roof deck, moisture stains on rafters, mold on sheathing, and ventilation function. Problems in the attic often indicate roof issues that aren't visible from the surface.
Get a Free Quote →Emergency Roof Repair
Storm, wind, hail, or fallen tree. We've handled every kind of roofing emergency in Stratford. First priority is always preventing further water damage to your interior. Second priority is documentation for insurance. Third is the permanent fix.
Get a Free Quote →Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →